Scaletrains Rivet Counter Ho Scale Dash 9-44W CN/IC Late DCC Ready

Scaletrains Rivet Counter Ho Scale Dash 9-44W CN/IC Late DCC Ready

SKU #'s

SXT33457 Cab #2707

SXT33459 Cab #2715

SXT33461 Cab #2717

SXT33463 Cab #2725

Since the CN DASH-9 walkway grates are so long, the normal expansion and contraction process has caused the walkways to exhibit a slight degree of waviness in some cases. By purchasing this discounted CN/IC DASH-9, you agree the walkways are not covered under warranty for this production run.

  • Era: late 2010s to present 
  • Series Canadian National (IC) 2697-2726, built June through October 2004 
  • Road numbers 2715 and 2725
  • Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab
  • Road number 2707
  • Lost-wax brass cast Nathan AirChime P5 (P135R24 configuration) horn mounted on engine cab
  • Fully-assembled
  • Multiple road numbers
  • Operating LED front and rear deck-mounted ditch lights with visors and integral red marker lights**
  • Operating LED ground lights on both sides of locomotive*
  • Operating LED front, rear, and side walkway lights*
  • LED-illuminated high-mount number boards*
  • Short snowplow without open doors, and with grab irons 
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers
  • 5-step stepwells with see-through steps
  • Walkway with see-through grating, and ribbed anticlimbers, front and rear
  • GE “nub” pattern walkway tread
  • Narrow profile end handrails
  • Front nose headlight
  • Nose door without window 
  • Two-piece nose top grab irons
  • Standard electrical cabinet access doors
  • Battery cabinet access door with latch
  • GE safety cab with Canadian “teardrop” front windshields, and late sub-base louvers and access panels
  • Cab interior with detailed back wall and front dash, high-back seats, conductor’s work station, and engineer’s AAR control stand
  • Medium-height mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
  • Large Sinclair “ice skate” communication antenna and small Sinclair “ice skate” End of Train (EOT) telemetry antenna
  • Electrical cabinet with drop grab irons on rear
  • No walkway HVAC unit installed
  • Continuous reinforcement rib under dynamic brake intake grilles, with emergency stretcher compartment adjacent
  • Late dynamic brake exhaust 
  • Late angled engine cab profile with raised “dot” treadplate on centerline 
  • Late non-flanged exhaust stack housing
  • “Bathtub” exhaust silencer
  • 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
  • Late radiator door grilles (alternating heights)
  • Standard brake wheel
  • Tall latched access door on long hood end
  • High-mounted rear sand fill
  • Late lifting lugs on ends of radiator wings
  • Accurately profiled frame with separately-applied plumbing and traction motor cabling
  • Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes, and flange lubricator sticks
  • Rotating axle bearing caps
  • Speed recorder on left side second axle
  • Dual Graham-White (Prime) 975-075 Air Filters
  • Graham-White 994-500 Series Air Dryer
  • 5,000-gallon fuel tank with vertical weld seams, and external retention tank on left side
  • Single fuel filler per side
  • Digital fuel gauges
  • Fuel tank mounted steel bell
  • Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover
  • Late handbrake chain brackets with dual pulleys
  • Spare coupler knuckle holders on rear pilot face
  • Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more
  • Motor with 5-pole, skew-wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible under magnification
  • Operates on Code 70, 83, and 100 rail
  • Packaging safely stores model
  • Minimum Radius: 18”
  • Recommended Radius: 22”

      C$274.99 C$247.99
      This item is out of stock
      There is only 1 item left in stock.
      There is only 1 item left in stock.
      This item is out of stock