Scaletrains Rivet Counter Ho Scale ES44 Canadian Pacific DCC & Sound

Scaletrains Rivet Counter Ho Scale ES44 Canadian Pacific DCC & Sound

SKU #'s

SXT33053 Cab# 8912

SXT33055 Cab# 8916

SXT33057 Cab# 8923

SXT33059 Cab# 8937

SXT33061 Cab# 8943

SXT33063 Cab# 8960


If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. *


  • Era: Late 2011 to Present
  • Series: 8900 to 8960, built 8-11/11 
  • Designated ES44AC
  • Fully assembled
  • Multiple road numbers
  • Operating LED front and rear deck-mounted ditch lights**
  • Operating LED front, rear, and rectangle side walkway lights*
  • Operating LED ground lights on both sides of locomotive*
  • Printed and LED lighted number boards*
  • Double trainline hoses with silver gladhands
  • Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
  • Front dummy Multiple Unit (MU) receptacles mounted to pilot face
  • Front and rear dual ECP brake equipment box and cable mounted on pilot face
  • See-through round-hole stepwell steps
  • Walkway with front anticlimber and anticlimber support brackets
  • GE “nub” tread plate on walkways
  • Late handrails with U-bolt caps and narrow rear most stanchion on long side rails
  • Front nose headlight
  • Front straight grab irons mounted directly to the nose
  • Right nose door with window
  • Nose door grab iron
  • Narrow profile end handrails
  • Front high-mounted (cab) numberboard housings
  • Left side under cab front access bolted X panel; rear door with square corrugated grille
  • Late cab without barrel bolt latches on subbase doors
  • Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera
  • Dual cab side blue flag holder
  • Tinted cab side windows
  • Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
  • Cab roof large square antenna dome and wireless matrix round dome antenna with conduit
  • Sand box clean out door with knuckle buster latch
  • Small bolted and hinged inverter cabinet door
  • Etched metal see-through dynamic brake intake grilles with blower motors visible inside
  • Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust
  • Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille
  • See-through dynamic brake exhaust
  • Short right side air intake grille
  • Left side auxiliary cab: 3 tall doors with latches on the #2 door and short auxiliary cab filter box door
  • Right side auxiliary cab: 4 doors with latches on #1 and #4 doors
  • Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof 
  • ES44 style engine cab doors: latched first door in each set of three
  • Left side exhaust cab doors: latched last door in set of three 
  • Flush heat exchanger housing with two piece wide slot grille
  • 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
  • Raised radiator grille
  • Left side radiator cab grille arrangement: Raised doors. Grilles – Tall-Short-Tall-Short-Tall, no grille under brake wheel short front angled grille and two-piece rear angled grille
  • Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille
  • Flat water fill box with sight glass
  • High mounted horizontal rear headlight
  • Rear wide-spaced dual dummy Multiple Unit (MU) receptacles
  • Accurately profiled frame with separately applied plumbing and cabling
  • AEI tag mounted on bracket below the right sidesill
  • Toilet drain with interior handle
  • Dual Graham-White (Prime) 075 air filters
  • Graham-White 994-500 air dryer
  • GE Hi-Ad trucks with smooth section in sideframe over center axle plus separately applied brake cylinders, air plumbing, and rotating bearing caps
  • 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge
  • Dual fuel fills per side with rear fill “blanked”
  • Angled top left side fuel tank top box
  • Short crankcase drainpipe
  • EOT basket mounted on left rear of fuel tank
  • Semi-scale coupler buffers equipped with die-cast metal semi-scale standard Type E knuckle couplers 
  • Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, 3-hose Multiple Unit (MU) clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more
  • Motor with 5-pole skew-wound armature
  • Balanced dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible under magnification
  • Operates on Code 70, 83, and 100 rail
  • Packaging safely stores model
  • Minimum Radius: 18”
  • Recommended Radius: 22”

      C$399.99
      This item is out of stock
      There are only 2 items left in stock.
      This item is out of stock
      This item is out of stock
      This item is out of stock
      This item is out of stock

      Reviews