Scaletrains Rivet Counter Ho Scale ES44 Ferromex (Zebra) DCC Ready

SKU #'s

SXT33078 Cab# 4636    

SXT33080 Cab# 4643

• Era: Present

• Series: 4600 to 4659, built 1-2/06  

• Road number: 4636

• New “Zebra” Paint Scheme with small red section on rear of inverter cabinet

• Variations in data label placement

• Wi-Tronix Violet Exterior Cab Cameras mounted to both cab sides

• Anti-vandalism grilles over windows

• Era: Present

• Series: 4600 to 4659, built 1-2/06  

• Road number: 4643

• New “Zebra” Paint Scheme with large red section on rear of inverter cabinet

• Variations in data label placement

• Wi-Tronix Violet Exterior Cab Cameras mounted to both cab sides

• Anti vandalism grilles over windows

• Fully assembled

• Multiple road numbers

• Operating LED front deck-mounted ditch lights

• Operating LED front, rear, and rectangle side walkway lights*

• Printed and LED lighted number boards*

• Single trainline hose with silver gladhand

• Front and rear raised pilot-mounted Multiple Unit (MU) receptacles

• Front dummy Multiple Unit (MU) receptacles mounted to pilot face

• See-through round-hole stepwell steps

• Walkway with front anticlimber and anticlimber support brackets

• GE “nub” tread plate on walkways

• Early handrails with wrap over stanchion heads left long rail for walkway box clearance and right long rail with wrap over head on 2nd lower stanchion

• Front nose headlight

• Left nose door with window

• Narrow profile end handrails

• Front high-mounted (cab) numberboard housings

• Left side under cab front access bolted X panel; rear door with square corrugated grille

• Early cab with optional 4 side windows; without barrel bolt latches on subbase doors

• Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera

• Single cab side blue flag holder

• Tinted cab side windows

• Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side

• Cab roof large square antenna dome, medium rectangle antenna dome with conduit, small tear drop dome and triangle cap antenna

• Sand box clean out door with knuckle buster latch

• Small bolted and hinged inverter cabinet door

• Etched metal see-through dynamic brake intake grilles with blower motors visible inside

• Left side dynamic brake cab: tri blower dynamic brake with flush exhaust

• Right side dynamic brake cab: door with grille, small X panel, door with grille, and door with grille

• See-through dynamic brake exhaust

• Short right side air intake grille

• Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front

• Capacitor box on walkway 

• Right side auxiliary cab: 4 doors with latches on #1 and #4 doors

• Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof 

• ES44 style engine cab doors: latched first door in each set of three

• Left side exhaust cab doors: latched last door in set of three 

• Flush heat exchanger housing with two piece wide slot grille

• 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment

• Flush radiator grille

• Left side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel

• Right side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, raised tall, raised tall, tall, short, tall, short front angled grill, two-piece rear angled grille 

• No water fill box

• Low mounted vertical rear headlight

• Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles

• Accurately profiled frame with separately applied plumbing and cabling

• AEI tag mounted on bracket below the right sidesill

• Toilet drain with interior handle

• Dual Graham-White (Salem) 824 air filters

• Early GE Steerable trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps

• Square handbrake chain bracket

• 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge

• Dual fuel fills per side with rear fill “blanked”

• Angled top left side fuel tank top box

• Short crankcase drainpipe

• Semi-scale coupler buffers equipped with die-cast metal semi-scale standard Type E knuckle couplers 

• Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, 3-hose Multiple Unit (MU) clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more

• Motor with 5-pole skew-wound armature

• Balanced dual flywheels

• All-wheel drive

• All-wheel electrical pick-up

• Directional LED headlights

• Printing and lettering legible under magnification

• Operates on Code 70, 83, and 100 rail

• Packaging safely stores model

• Minimum Radius: 18”

• Recommended Radius: 22”