Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels
Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof, trumpets arranged in non-standard configuration
Retrofitted late ET44 style exhaust stack, no flange or center support on stack
Fully-assembled
LED-illuminated ground lights on both sides of locomotive*
LED-illuminated front, rear and rectangle side walkway lights*
LED-illuminated front deck-mounted alternating ditch lights**
Printed and LED-illuminated lighted number boards*
LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating)
Sill-mounted tow chain
Semi-scale coupler buffers equipped with die-cast metal semi-scale SBE bottom shelf knuckle couplers
Inside loop uncoupling levers with up down brackets
Single trainline hose with silver gladhand
Pilot-mounted battery charging receptacles
Front dummy Multiple Unit (MU) receptacles mounted to pilot face
Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
Front and rear single ECP brake equipment box and cable mounted on pilot face
See-through round-hole stepwell steps
Walkway with front anticlimber; no support brackets
GE “nub” pattern walkway tread
Late handrails with U-bolt caps and narrow rear most stanchion on long side rails
Wide profile end handrails
Sand box clean out door with knuckle buster latch
Front nose headlight
Front straight grab irons mounted directly to the nose
Front right side mounted narrow nose drop grab iron
Right nose door with window
Front high-mounted (cab) numberboard housings
Dual cab side blue flag holder
Left side under cab front access bolted X panel; rear door with square corrugated grille
Late cab with barrel bolt latches on subbase doors
Detailed cab interior with separate floor, rear wall, seats, and control stand
In cab grade crossing camera mounted on right side
Tinted cab side windows
Tall mirror mounted in front of sliding cab side windows on both sides
Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side
Cab roof GE communications handler octagonal dome and dual long STI-CO PTC Dual Track Antenna System without Radome covers
See-through dynamic brake exhaust
Left side dynamic brake cab: tri blower dynamic brake with flush exhaust
Etched metal see-through dynamic brake intake grilles with blower motors visible inside
Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille
Dynamic brake cab door with high door handle and high mounted door handle bumper
Long right side air intake grille
Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door
Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors
ES44 style engine cab doors: latched first door in each set of three
Three engine cab roof lift rings
Left side exhaust cab doors: latched last door in set of three
Flush heat exchanger housing with single piece narrow slot grille
Late raised radiator grille
22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel short front angled grille and two-piece rear angled grille
Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille
Flat water fill box with sight glass
High mounted horizontal rear headlight
Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles
Accurately profiled frame with separately applied plumbing and cabling
Late GE steerable trucks with separately applied brake cylinders, air plumbing, rotating bearing caps, and reinforcement bar under center journal
Rust-color painted wheelsets
Square handbrake chain bracket
Toilet drain with exterior handle
AEI tag mounted to right sidesill under rear battery box door
Dual Graham-White (Prime) finned 075 air filters
Graham-White 994-500 air dryer
5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge
Dual fuel fills per side with rear fill “blanked”
Flat top left side fuel tank top box
Long crankcase drainpipe attached to the end of the fuel tank
Low snowplow without MU doors
Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more
Motor with 5-pole skew wound armature
Dual flywheels
All-wheel drive
All-wheel electrical pick-up
Directional LED headlights
Printing and lettering legible under magnification
Operates on Code 70, 83, and 100 rail
Packaging safely stores model
Recommended Radius: 22”
You may also like
Contact us
Store Address: 379 Talbot Street, St. Thomas, Ontario N5P 1B7
By Phone: Canada: 1-226-636-0664 or United States: 1-810-216-7070
Frequently asked questions
What is the return policy?
Here with Railway City Hobbies, our return policy is pretty straight forward:
In Stock Items
90 day when purchased at physical store
Item & packaging cannot be damaged or changed in anyway
35 day return when purchased from online store
Buyer pays return shipping
Initial shipping charge is not refunded
Item & packaging cannot be damaged in anyway
Special Order / Pre-Order
30 Days to return from the date of order fulfillment on Special Orders placed over phone or in person at store
15% restocking fee will be applied to return
35 Days to return from the date of order fulfillment on Pre-Order Purchases placed over phone, online or in person
15% restocking fee will be applied to return
Cancellations on Pre-Orders:
Cancellation after manufacturer's order deadline will incur a 15% restocking fee that will be deducted from deposit refund. Items on order are to be paid in full before shipping. Items are held up to 45 days after pre-order items arrive. If items aren't paid for in full and 45 days have passed after pre-order items arrive, the items will go back into stock and deposit is forfeited. Cancellation of pre-orders within 30 days of products arrival will result in forfeiture of deposit. Fee will be based on the total order.
If you have any questions please feel free to contact me via email or by phone.
What are store hours?
Normal Store Hours are: Wednesday to Friday 10am - 4pm and Saturday 10 am-3 pm
Summer Store Hours are : Friday 10am - 4pm & Saturday 10am - 3pm
Summer Store Hours start June 22nd and end September 4th
Please check our facebook page for store closure dates / changes in store hours.
When will I get my order?
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Where are your products manufactured?
Model trains, Plastic Model kits products are manufactured in China.
How much does shipping cost?
Shipping is calculated based on your location and the items in your order. You will always know the shipping price before you purchase.