We are in process of creating and designing new website.
Scaletrains Rivet Counter Ho Scale SD45 Santa Fe DCC & Sound *Reservation*

Scaletrains Rivet Counter Ho Scale SD45 Santa Fe DCC & Sound *Reservation*

SKU #'s

SXT32401 Cab# 5536

SXT32403 Cab# 5549

SXT32405 Cab# 5563

SXT32407 Cab# 5571

SXT32409 Cab# 5579

SXT32411 Cab# 5588


*Pre-Order Deadline is May 18th, 2020. Orders made after which are subjected to availability. Price is $369.99 CDN + Tax + Shipping. Price is subject to fluctuation due to exchange with the US Dollar. Price will be based of the USD price $274.99.  No Initial Deposit Necessary. A deposit of $50 will be required upon pre-order deadline.  Shipping is not free. Shipping rate will be determined upon products arrival. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. *


Santa Fe

  • Era: 1970s
  • Series 5530-5589 (ex-1830-1889), built 10-12/66, Phase Ib1
  • Road numbers 5536 and 5588
    • Lost-wax brass Leslie SL-3L-R low-profile horn; mounted center rear of number board
    • Large Sinclair Excalibur “ice skate” antenna (communications) mounted on dust bin
    • Lettering and data placement variations
  • Road numbers 5549, 5571 and 5579
    • Lost-wax brass Leslie S-3L-R horn; mounted center rear of number board housing
    • Large Sinclair Excalibur “ice skate” antenna (communications) mounted on dust bin
    • Lettering and data placement variations
  • Road number 5563
    • Lost-wax brass Leslie S-3L-R horn; mounted center rear of number board housing
    • Can type antenna mounted on dust bin
    • Lettering and data placement variationsOperating LED-lit Prime PM-8901 Stratolite Beacon
  • Operating LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket
  • Operating LED-lit ground lights
  • Front and rear MU hose retainer grab irons
  • Front and rear early small deck extension
  • Pivoting front and rear drop steps
  • “Short” stepwells with see-through steps
  • “Early” (“X”) pattern walkway treadplate
  • Rectangular walkway lights (non-operating)
  • Latched battery box doors with narrow louvers
  • Cab sub-base doors with stiffener rib
  • 81” low short hood with plated-over handbrake location
  • Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top
  • Standard EMD high headlight in numberboard housing
  • “35-Line” cab with standard front windshields
  • Small mirror mounted fore and aft of cab side window on both sides of cab
  • Standard EMD sunshades mounted on long sunshade tracks
  • No cab vents
  • Standard electrical cabinet seam and bolted alternator door
  • No ECAFB
  • Early (smooth) blower duct housing
  • Early (short forward taper) extended-range dynamic brakes with retrofitted cooling vents and “T” vent on top of roof
  • Chickenwire-pattern radiator intake grille mesh
  • Photoetched spiral ring grilles with center disk
  • Long walkway duct with three short stanchions
  • Front and rear straight uncoupling levers with loop handles and four inner and two outer brackets
  • Handrail set with pilot face mounted outer end rail stanchions
  • 3-hose MU hose clusters with silver gladhands
  • Early (angled) deck-mounted MU receptacle
  • Short “nub-bottom” pilot face
  • Tall jacking pads with holes
  • Sill-mount EFCO button
  • Frame-mounted bell
  • Salem air filter (accordion style)
  • 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on both tank sides
  • Detailed Flexicoil (low-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
  • Speed recorder second axle, left side
  • ACI labels mounted to blower duct on left side and rear cab step kickplate on right side

          Rivet Counter SD45 Locomotives Also Feature

          • Fully assembled
          • Multiple road numbers
          • Printed and LED-lighted number boards
          • Scale sectioned walkway treadplate
          • Underbody frame rail with separate plumbing and traction motor cables
          • Accurate hood door and long hood details
          • Inertial air intake grilles without drip rails
          • Separately applied dust bin and exhaust stack
          • Accurately profiled dynamic brake housings
          • See-through dynamic brake intakes with resistor grid
          • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
          • Sliding cab windows
          • Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
          • Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
          • Directional LED headlights
          • All-wheel drive
          • All-wheel electrical pick-up
          • Motor with 5-pole skew-wound armature
          • Dual flywheels
          • Printing and lettering legible even under magnification
          • Operates on Code 70, 83 and 100 rail
          • Packaging safely stores model
          • Color matched to Tru-Color Paint colors whenever possible
          • Minimum radius: 18”
          • Recommended radius: 22”


              C$369.99 C$0.00
              Free Shipping!

              Reviews