Scaletrains Rivet Counter Ho Scale SD45 Seaboard Coast Line DCC Ready *Pre-order*

SKU #'s

SXT32191 Cab# 2024

SXT32193 Cab# 2028

SXT32195 Cab# 2031

SXT32197 Cab# 2034

SXT32199 Cab# 2037

SXT32201 Cab# 2040

*Pre-Order Deadline is December 9th, 2019. Orders made after which are subjected to availability. Price is $249.99 CDN + Tax + Shipping. Price is subject to fluctuation due to exchange with the US Dollar. Price will be based of the USD price $184.99.  No Initial Deposit Necessary. A deposit of $50 will be required upon pre-order deadline.  Shipping is not free. Shipping rate will be determined upon products arrival. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. * 

Seaboard Coast Line

• Era: 1970s
• Series 2024-2037, built 9 to 10/71
• Operating LED-lit Pyle-National “Gyralite” in numberboard housing (upper lens is standard, and lower red lens is a “UDE” light)
• Operating LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket
• Operating LED-lit ground lights
• Front and rear hose catch trays
• Front early small deck extension
• Pivoting front and rear drop steps
• “Tall” stepwells with see-through steps
• “Late” pattern walkway treadplate
• Rectangular walkway lights (non-operating)
• Latched battery box doors with narrow louvers
• Latched cab sub-base doors with early hinges
• 81” low short hood without handbrake
• Standard EMD low headlight in face of short hood
• Late drop grabs and standard nut-bolt-washer (NBW) mounting on nose front and top
• “35-Line” cab with standard front windshields
• No mirrors or wind wings
• Standard EMD sunshades and long sunshade tracks
• Lost-wax brass Leslie S-5T-RRO horn,; mounted center rear of number board housing.
• ­­Motorola ASP-16 “Firecracker” communications antenna mounted on cab roof
• Standard electrical cabinet seam and bolted alternator door
• Small ECAFB
• Late (ribbed) blower duct housing
• Early inertial air intake grilles without drip rails
• Late (long forward taper) standard-range dynamic brakes with cooling vents and “T” vent on top of roof
• Rectangular-pattern mesh radiator intake grilles
• Photoetched concentric ring grille
• Short walkway duct (four short stanchions)
• Front and rear straight uncoupling levers with loop handles and four inner and two outer brackets
• Handrail set with deck mounted outer end rail stanchions
• 4-hose MU hose clusters with silver gladhands
• Late deck-mounted MU receptacle
• Tall “zig-zag” pilot face
• Tall jacking pads with holes
• Tab-mount EFCO button
• Frame-mounted bell
• Salem air filter (accordion style)
• 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on right tank side
• Detailed Flexicoil (high-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
• Speed recorder second axle, left side
• ACI label placards included in polybag for optional installation by the modeler

Rivet Counter SD45 Locomotives Also Feature

• Fully assembled
• Multiple road numbers
• Printed and LED-lighted number boards
• Scale sectioned walkway treadplate
• Underbody frame rail with separate plumbing and traction motor cables
• Accurate hood door and long hood details
• Inertial air intake grilles without drip rails
• Separately applied dust bin and exhaust stack
• Accurately profiled dynamic brake housings
• See-through dynamic brake intakes with resistor grid
• Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
• Sliding cab windows
• Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
• Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
• Directional LED headlights
• All-wheel drive
• All-wheel electrical pick-up
• Motor with 5-pole skew-wound armature
• Dual flywheels
• Printing and lettering legible even under magnification
• Operates on Code 70, 83 and 100 rail
• Packaging safely stores model
• Color matched to Tru-Color Paint colors whenever possible
• Minimum radius: 18”
• Recommended radius: 22”