Scaletrains Rivet Counter Ho Scale SD45 Seaboard Coast Line DCC & Sound *Pre-order*

Scaletrains Rivet Counter Ho Scale SD45 Seaboard Coast Line DCC & Sound *Pre-order*

SKU #'s

SXT32190 Cab# 2024

SXT32192 Cab# 2028

SXT32194 Cab# 2031

SXT32196 Cab# 2034

SXT32198 Cab# 2037

SXT32200 Cab# 2040


*Pre-Order Deadline is December 9th, 2019. Orders made after which are subjected to availability. Price is $369.99 CDN + Tax + Shipping. Price is subject to fluctuation due to exchange with the US Dollar. Price will be based of the USD price $274.99.  No Initial Deposit Necessary. A deposit of $50 will be required upon pre-order deadline.  Shipping is not free. Shipping rate will be determined upon products arrival. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. * 

Seaboard Coast Line

  • Era: 1970s
  • Series 2024-2037, built 9 to 10/71
  • Operating LED-lit Pyle-National “Gyralite” in numberboard housing (upper lens is standard, and lower red lens is a “UDE” light)
  • Operating LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket
  • Operating LED-lit ground lights
  • Front and rear hose catch trays
  • Front early small deck extension
  • Pivoting front and rear drop steps
  • “Tall” stepwells with see-through steps
  • “Late” pattern walkway treadplate
  • Rectangular walkway lights (non-operating)
  • Latched battery box doors with narrow louvers
  • Latched cab sub-base doors with early hinges
  • 81” low short hood without handbrake
  • Standard EMD low headlight in face of short hood
  • Late drop grabs and standard nut-bolt-washer (NBW) mounting on nose front and top
  • “35-Line” cab with standard front windshields
  • No mirrors or wind wings
  • Standard EMD sunshades and long sunshade tracks
  • Lost-wax brass Leslie S-5T-RRO horn,; mounted center rear of number board housing.
  • ­­Motorola ASP-16 “Firecracker” communications antenna mounted on cab roof
  • Standard electrical cabinet seam and bolted alternator door
  • Small ECAFB
  • Late (ribbed) blower duct housing
  • Early inertial air intake grilles without drip rails
  • Late (long forward taper) standard-range dynamic brakes with cooling vents and “T” vent on top of roof
  • Rectangular-pattern mesh radiator intake grilles
  • Photoetched concentric ring grille
  • Short walkway duct (four short stanchions)
  • Front and rear straight uncoupling levers with loop handles and four inner and two outer brackets
  • Handrail set with deck mounted outer end rail stanchions
  • 4-hose MU hose clusters with silver gladhands
  • Late deck-mounted MU receptacle
  • Tall “zig-zag” pilot face
  • Tall jacking pads with holes
  • Tab-mount EFCO button
  • Frame-mounted bell
  • Salem air filter (accordion style)
  • 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on right tank side
  • Detailed Flexicoil (high-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
  • Speed recorder second axle, left side
  • ACI label placards included in polybag for optional installation by the modeler

Rivet Counter SD45 Locomotives Also Feature

  • Fully assembled
  • Multiple road numbers
  • Printed and LED-lighted number boards
  • Scale sectioned walkway treadplate
  • Underbody frame rail with separate plumbing and traction motor cables
  • Accurate hood door and long hood details
  • Inertial air intake grilles without drip rails
  • Separately applied dust bin and exhaust stack
  • Accurately profiled dynamic brake housings
  • See-through dynamic brake intakes with resistor grid
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • Sliding cab windows
  • Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
  • Directional LED headlights
  • All-wheel drive
  • All-wheel electrical pick-up
  • Motor with 5-pole skew-wound armature
  • Dual flywheels
  • Printing and lettering legible even under magnification
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Color matched to Tru-Color Paint colors whenever possible
  • Minimum radius: 18”
  • Recommended radius: 22”


      C$369.99 C$0.00
      Free Shipping!

      Reviews