Contact us
Store Address: 379 Talbot Street, St. Thomas, Ontario N5P 1B7
By Phone: Canada: 1-226-636-0664 or United States: 1-810-216-7070
Skip to product information
Rivet Counter HO Scale Wabtec AC44C6M, NS/ "Thank You To Our Railroaders" #4822 DCC & Sound * Reservation*
Sale price
$0.00
Regular price
$560.99
SKU #'s
SXT42480 Cab # 4822
Estimated pre-order price is $485.99 CDN + Tax + Shipping.
There will be a $75 CDN tariff charge added to invoice (at current tariff rate, As of October 31st, 2025).
Price is subject to change due to exchange rate fluctuations & fluctuations in US tariff policy. Price is based off 339.99 USD. If tariffs rate changes between when order is placed and when product arrives, the invoice will be updated. A deposit of $50 will be required 45 days before product is slated to arrive . If no deposit is made the order will be cancelled.
- All-new model
- Era: 2024 to present
- Series 4761 to 4860; ex-9560 to 9744, built 2000 to 2001
- Road number 4822; ex-NS 9615
- Fully-assembled
- Operating LED-illuminated ground lights on both sides of locomotive*
- Operating LED-illuminated front and rear deck-mounted alternating ditch lights**
- Operating LED-illuminated front, rear, and side walkway lights*
- Printed cab-mounted number boards with separately controlled LED-illumination*
- Directional LED-illuminated headlights
- LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating)
- Tall and narrow plow with no doors, notched around train line hose opening, welded on reinforcement plates at the bottom, stepped top, and two (2) grab irons
- Rear pilot with a welded-on reinforcement plate
- Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers
- Front Inside loop uncoupling levers with up-down brackets and rear inside loop down brackets
- 5-step stepwells with see-through steps
- Walkway with front and rear anticlimbers
- GE “nub” pattern walkway tread
- Wide profile end handrails
- Front high (cab) mounted headlight
- Nose door with window; security padlock with hasp
- Two-piece nose top grab irons
- Battery cabinet access door with latch
- GE safety cab with four (4) side windows
- Right side cab under floor access doors: dual large louver panels per door
- Left side cab under floor access doors: bolted panel forward of the HVAC unit
- Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand
- In-cab grade crossing camera
- Tinted cab side windows
- Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
- JEM Communications PTC antenna farm with Sinclair antennas
- Cab HVAC vent panels with 13 louvers and circular latches
- Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern
- Continuous reinforcement rib under dynamic brake intake grilles
- High-capacity dynamic brake exhaust (3-port)
- Rearward right-side air intake grille
- Left side auxiliary cab: 3 short doors with latches on the #2 door and wide auxiliary cab filter box door
- Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors
- Late wide width inertial cabinet with no spacer between the engine cab. Short rectangular vent and wide X-panel on the right side and rectangular vent on the left side. Partial length horizontal access panel on the left side with a small adjacent X-panel
- Late angled engine cab profile with raised “dot” treadplate on centerline
- High-mounted lift rings on forward engine cab power assembly doors only
- Three door latches per side on the exhaust cab doors
- Lost-wax brass cast Nathan AirChime P3 horn with shower caps mounted on engine cab
- Late non-flanged exhaust stack housing
- “Bathtub” exhaust silencer
- 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
- Right side late radiator door grilles in alternating heights
- No right side radiator wing access door
- Electronic Handbrake with panel in front of the brake wheel
- Flat stamped
- Left rear hood door grille arrangement: tall, short, tall grilles
- Low-mounted rear sand fill
- Late angled lifting “tabs” on ends of radiator wings
- No forward radiator lifting lugs
- Left side long rail all stanchions, early type
- Right side long rail, all stanchions are early type
- Accurately profiled frame with separately-applied plumbing and traction motor cabling
- GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps
- Rust-color painted wheelsets
- No speed recorder
- Dual Graham-White (Salem) 824-100 centrifugal air filters
- Graham-White 994-500 series air dryer
- 5,000-gallon fuel tank with no weld seams on the right side with a single vertical and a single angled seam on the left with late late-style air reservoir drain notch
- Fuel tank mounted electronic bell
- Separate air tanks with upper mounting brackets
- Curved handbrake chain bracket
- Spare coupler knuckle holders on rear pilot face
- Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more
- Motor with 5-pole, skew-wound armature
- Dual flywheels
- All-wheel drive
- All-wheel electrical pick-up
- Printing and lettering legible under magnification
- Operates on Code 70, 83, and 100 rail
- Packaging safely stores model
- Minimum Radius: 18”
- Recommended Radius: 22”