Scaletrains Rivet Counter Ho Scale EMD SD40T-2 Southern Pacific/As Delivered/88" Nose DCC Ready

Scaletrains Rivet Counter Ho Scale EMD SD40T-2 Southern Pacific/As Delivered/88" Nose DCC Ready

SKU #'s

SXT39839 Cab #8233

SXT39841 Cab #8239

SXT39843 Cab #8246

SXT39845 Cab #8254

SXT39847 Cab #8270

SXT39849 Cab #8298


Road Number Specific ScaleTrains


  • New road numbers 
  • Era: 1980s 
  • SP Series 8230 to 8299; built 3-7:1980
  • Fully-assembled 
  • Multiple road numbers
  • No truck ground lights (prototype not equipped)
  • LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct*
  • Equipped with either:
    • LED-illuminated front and rear red LED Pyle-National 17540 “UDE” Gyralites*
    • LED-illuminated front and rear dual LED Pyle-National 20585 (Translite) “Gyralite” signal light*
  • LED-illuminated front and rear stand-off tri-color class lights**
  • Printed number boards with separately controlled backlit LED-illumination*
  • * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC

    ** Class lights illuminate in white color only in DC operation. Access and changing colors an ESU decoder with appropriate programming while operating using DCC

  • Directional LED headlights
  • Front late SP/UP-style pilot plow with MU hose doors and grab irons
  • Front and rear 3-hose MU hose clusters with silver gladhands
  • Front "tall" stepwells with see-through steps and rear “ladder” steps
  • 88” low short hood with wheel handbrake
  • Bolted battery box doors with wide louvers
  • Late cab sub-base doors with lift-off hinges
  • SP nose headlight package 
  • Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and “L” front window
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • Original cab front door 
  • Sliding cab side windows
  • Standard Mirror mounted fore of cab side windows, both sides
  • Rear cab side vent on left side
  • Standard EMD sunshades and long sunshade tracks
  • Vapor Corp. cab roof HVAC
  • Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing
  • “Whip” radio antenna mounted on ground plane over dust bin
  • Late electrical cabinet "zig-zag" seam, closer to rear of cab
  • Welded ECAFB (late)
  • Late inertial air intake grilles with top and bottom drip rail
  • "Post 1980" extended-range dynamic brake with exhaust silencer
  • Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets
  • Straight rear uncoupling lever with four mounting brackets
  • Handrail set with anticlimber front; inward facing rear end rail mounting brackets and chain
  • Handrail ends and step faces painted white
  • Front and rear 3-hose MU hose clusters with silver gladhands
  • Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers
  • Notched pilot faces with high mounted angled lifting slots
  • Pilot-face mounted MU receptacle
  • Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber
  • Scale sectioned treadplate detail on walkways
  • Accurate hood door and long hood detail
  • “Post-1980” exhaust silencer
  • See-through dynamic brake intakes with resistor grid detail
  • See-through standard 48” dynamic brake fan housings with fan blades visible inside
  • Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail
  • Etched-metal radiator exhaust grills with radiator shutters visible underneath
  • Separate radiator fan grab iron
  • Underbody frame rail with separate plumbing and traction motor cables
  • Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details
  • Dimensionally accurate truck centers
  • Speed recorder first axle, left side
  • Forward facing handbrake chain mount for Flexicoil trucks
  • Four-hole SP jacking pads
  • Spare knuckle holders on fuel tank near fuel filler
  • Sill-mounted EFCO
  • Frame-mounted bell
  • Double Graham-White (Prime) brand 975-075 (can style)
  • Standard air tanks
  • 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe 
  • Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Motor with 5-pole skew wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Printing and lettering legible even under magnification
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Recommended radius: 22”

      C$291.99
      There is only 1 item left in stock.
      There is only 1 item left in stock.
      There is only 1 item left in stock.
      There is only 1 item left in stock.
      There is only 1 item left in stock.
      There is only 1 item left in stock.

      Reviews