Scaletrains Rivet Counter Ho Scale ES44 Canadian Pacific DCC Ready

SKU #'s

SXT33054 Cab# 8912

SXT33056 Cab# 8916

SXT33058 Cab# 8923

SXT33060 Cab# 8937

SXT33062 Cab# 8943

SXT33064 Cab# 8960

$10 CDN/$8 USD Flat Rate Shipping on Pre-order/Reservations to addresses in North America. Excludes Alaska & Hawaii. Addresses outside north america will receive $10 CDN Discount on there total shipping

*Orders are subjected to availability. Estimated Price is $253.99 CDN + Tax + Shipping. Price is subject to fluctuation due to exchange with the US Dollar. Price will be based of the USD price $194.99.  No Initial Deposit Necessary. A deposit of $50 will be required upon pre-order deadline. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. *

• Era: Late 2011 to Present

• Series: 8900 to 8960, built 8-11/11 

• Designated ES44AC

• Fully assembled

• Multiple road numbers

• Operating LED front and rear deck-mounted ditch lights**

• Operating LED front, rear, and rectangle side walkway lights*

• Operating LED ground lights on both sides of locomotive*

• Printed and LED lighted number boards*

• Double trainline hoses with silver gladhands

• Front and rear raised pilot-mounted Multiple Unit (MU) receptacles

• Front dummy Multiple Unit (MU) receptacles mounted to pilot face

• Front and rear dual ECP brake equipment box and cable mounted on pilot face

• See-through round-hole stepwell steps

• Walkway with front anticlimber and anticlimber support brackets

• GE “nub” tread plate on walkways

• Late handrails with U-bolt caps and narrow rear most stanchion on long side rails

• Front nose headlight

• Front straight grab irons mounted directly to the nose

• Right nose door with window

• Nose door grab iron

• Narrow profile end handrails

• Front high-mounted (cab) numberboard housings

• Left side under cab front access bolted X panel; rear door with square corrugated grille

• Late cab without barrel bolt latches on subbase doors

• Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera

• Dual cab side blue flag holder

• Tinted cab side windows

• Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side

• Cab roof large square antenna dome and wireless matrix round dome antenna with conduit

• Sand box clean out door with knuckle buster latch

• Small bolted and hinged inverter cabinet door

• Etched metal see-through dynamic brake intake grilles with blower motors visible inside

• Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust

• Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille

• See-through dynamic brake exhaust

• Short right side air intake grille

• Left side auxiliary cab: 3 tall doors with latches on the #2 door and short auxiliary cab filter box door

• Right side auxiliary cab: 4 doors with latches on #1 and #4 doors

• Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof 

• ES44 style engine cab doors: latched first door in each set of three

• Left side exhaust cab doors: latched last door in set of three 

• Flush heat exchanger housing with two piece wide slot grille

• 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment

• Raised radiator grille

• Left side radiator cab grille arrangement: Raised doors. Grilles – Tall-Short-Tall-Short-Tall, no grille under brake wheel short front angled grille and two-piece rear angled grille

• Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille

• Flat water fill box with sight glass

• High mounted horizontal rear headlight

• Rear wide-spaced dual dummy Multiple Unit (MU) receptacles

• Accurately profiled frame with separately applied plumbing and cabling

• AEI tag mounted on bracket below the right sidesill

• Toilet drain with interior handle

• Dual Graham-White (Prime) 075 air filters

• Graham-White 994-500 air dryer

• GE Hi-Ad trucks with smooth section in sideframe over center axle plus separately applied brake cylinders, air plumbing, and rotating bearing caps

• 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge

• Dual fuel fills per side with rear fill “blanked”

• Angled top left side fuel tank top box

• Short crankcase drainpipe

• EOT basket mounted on left rear of fuel tank

• Semi-scale coupler buffers equipped with die-cast metal semi-scale standard Type E knuckle couplers 

• Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, 3-hose Multiple Unit (MU) clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more

• Motor with 5-pole skew-wound armature

• Balanced dual flywheels

• All-wheel drive

• All-wheel electrical pick-up

• Directional LED headlights

• Printing and lettering legible under magnification

• Operates on Code 70, 83, and 100 rail

• Packaging safely stores model

• Minimum Radius: 18”

• Recommended Radius: 22”