Scaletrains Rivet Counter Ho Scale ES44 Norfolk Southern DCC Ready

SKU #'s

SXT32519 Cab# 8091

SXT32521 Cab# 8095

SXT32523 Cab# 8107

SXT32525 Cab# 8119

SXT32527 Cab# 8134

SXT32529 Cab# 8140

If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. *

Road Number Specific ScaleTrains

Era: 2012 to present
Series 8091-8140, built 2012
Horsehead paint scheme
Designated ES44AC
Front high (cab) mounted headlight
Operating LED front and rear deck-mounted alternating ditch lights**
Operating LED front, rear, and side walkway lights*
Operating LED ground light on left side of locomotive*
See-through round-hole stepwell steps
Walkway with front anticlimber and support brackets
Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
Front dummy Multiple Unit (MU) receptacles mounted to pilot face
Single trainline hose with silver gladhand
Rear wide-spaced dual dummy Multiple Unit (MU) receptacles
Front and rear ECP brake equipment box and cable mounted on pilot face
Pilot-mounted battery charging receptacles
Sill-mounted brake stick holder
Wide profile end handrails
Late handrails with U-bolt caps and narrow rear most stanchion on long side rails
Front straight grab irons mounted directly to the nose
Right nose door without window
Front right side mounted narrow nose drop grab iron
Front high-mounted (cab) numberboard housings
Late cab with barrel bolt latches on subbase doors
Left side under cab front access bolted X panel; rear door with square corrugated grille
LSL (Locomotive Speed Limiter) indicator lights on cab sides (Non-operating)
Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
Cab roof octagonal antenna dome with dual STI-CO PTC antenna with domes
Sand box clean out door with knuckle buster latch and hinge
Small hinged inverter cabinet door
Left side dynamic brake cab: tri blower dynamic brake with flush exhaust
Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille
Short right side air intake grille
Left side auxiliary cab: 3 medium doors with latches on the #2 door and long auxiliary cab filter box door
Right side auxiliary cab: 4 doors with latches on #1 and #4 doors
Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof
ES44 style engine cab doors: latched first door in each set of three
Left side exhaust cab doors: latched last door in set of three
Flush heat exchanger housing
Raised radiator grille
Right side radiator cab: fourth and fifth have short grilles
Angled water fill box
Rear anticlimber without support brackets
AEI tag mounted on bracket below the right sidesill
Dual Graham-White (Prime) 075 air filters
Graham-White 994-500 air dryer
GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps
5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge
Dual fuel fills per side with rear fill “blanked”
Angled top left side fuel tank top box
Short sump drainpipe
Semi-scale coupler buffers equipped with die-cast metal semi-scale standard Type E knuckle couplers
Color matched to TruColor Paint color TCP-010 Black

Rivet Counter ES44 Locomotives Also Feature

Fully assembled
Multiple road numbers
Directional LED headlights
Printed and LED lighted number boards*
GE “nub” tread plate on walkways
Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera
Tinted cab side windows
Etched metal see-through dynamic brake intake grilles with blower motors visible inside
See-through dynamic brake exhaust
Separate exhaust stack
22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
Accurately profiled frame with separately applied plumbing and cabling
Factory-applied wire grab irons, snowplow, spare knuckles, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more.
All-wheel drive
All-wheel electrical pick-up
Dual flywheels
Motor with 5-pole skew wound armature
Printing and lettering legible under magnification
Operates on Code 70, 83, and 100 rail
Packaging safely stores model
Minimum Radius: 18”
Recommended Radius: 22