Scaletrains Rivet Counter Ho Scale ES44AH CSX Heritage (Conrail) DCC Ready #1976 *Reservation*

Scaletrains Rivet Counter Ho Scale ES44AH CSX Heritage (Conrail) DCC Ready #1976 *Reservation*

SKU #'s

SXT39908 Cab #1976


*Pre-order discount of $15 per locomotive will be applied on invoice*

Pre-Order Estimated price is $282.99 CDN + Tax + Shipping. Price will be subject to change to fluctuation in exchange rate. Price in USD is $204.99 A deposit of $50 will be required upon pre-order deadline. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. * 

Road Number Specific ScaleTrains


  • Era: 2023 to present

  • Road number 1976

  • Special Conrail Heritage scheme

  • Series 3065 to 3174; built 2-11:2013

  • Formerly CSX 3069

  • Inverter Cabinet with Bolted and hinged access door, both top X panel wider, three lower X panels with 5 - 5 - 5 Bolt Pattern

  • Lost wax brass cast Nathan AirChime K5HLR2 horn

  • Retrofitted late ET44 style exhaust stack, no flange or center support on stack

  • Fully-assembled

  • LED-illuminated ground lights on both sides of locomotive*

  • LED-illuminated front, rear and rectangle side walkway lights*

  • LED-illuminated front deck-mounted alternating ditch lights**

  • Printed and LED-illuminated lighted number boards*
  • * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC

  • LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating)

  • Sill-mounted tow chain

  • Semi-scale coupler buffers equipped with die-cast metal semi-scale SBE bottom shelf knuckle couplers 

  • Inside loop uncoupling levers with up down brackets

  • Single trainline hose with silver gladhand

  • Pilot-mounted battery charging receptacles

  • Front dummy Multiple Unit (MU) receptacles mounted to pilot face

  • Front and rear raised pilot-mounted Multiple Unit (MU) receptacles

  • Front and rear single ECP brake equipment box and cable mounted on pilot face

  • See-through round-hole stepwell steps

  • Walkway with front anticlimber; no support brackets

  • GE “nub” pattern walkway tread

  • Late handrails with U-bolt caps and narrow rear most stanchion on long side rails

  • Wide profile end handrails

  • Sand box clean out door with knuckle buster latch

  • Front nose headlight

  • Front straight grab irons mounted directly to the nose

  • Front right side mounted narrow nose drop grab iron

  • Right nose door with window

  • Front high-mounted (cab) numberboard housings

  • Dual cab side blue flag holder

  • Left side under cab front access bolted X panel; rear door with square corrugated grille

  • Late cab with barrel bolt latches on subbase doors

  • Detailed cab interior with separate floor, rear wall, seats, and control stand

  • In cab grade crossing camera mounted on right side

  • Tinted cab side windows

  • Tall mirror mounted in front of sliding cab side windows on both sides

  • Switching mirror mounted between rear of sliding cab side windows and fixed rear  window on engineer’s side 

  • Cab roof GE communications handler octagonal dome and dual long STI-CO PTC Dual Track Antenna System without Radome covers

  • See-through dynamic brake exhaust

  • Left side dynamic brake cab: tri blower dynamic brake with flush exhaust

  • Etched metal see-through dynamic brake intake grilles with blower motors visible inside

  • Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille

  • Dynamic brake cab door with high door handle and high mounted door handle bumper

  • Long right side air intake grille

  • Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door

  • Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors

  • ES44 style engine cab doors: latched first door in each set of three

  • Three engine cab roof lift rings

  • Left side exhaust cab doors: latched last door in set of three 

  • Flush heat exchanger housing with single piece narrow slot grille

  • Late raised radiator grille

  • 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment

  • Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel short front angled grille and two-piece rear angled grille

  • Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille

  • Flat water fill box with sight glass

  • High mounted horizontal rear headlight

  • Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles

  • Accurately profiled frame with separately applied plumbing and cabling

  • Late GE steerable trucks with separately applied brake cylinders, air plumbing, rotating bearing caps, and reinforcement bar under center journal

  • Rust-color painted wheelsets

  • Square handbrake chain bracket

  • Toilet drain with exterior handle

  • AEI tag mounted to right sidesill under rear battery box door

  • Dual Graham-White (Prime) finned 075 air filters

  • Graham-White 994-500 air dryer

  • 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge

  • Dual fuel fills per side with rear fill “blanked”

  • Flat top left side fuel tank top box

  • Long crankcase drainpipe attached to the end of the fuel tank

  • Low snowplow without MU doors

  • Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more

  • Motor with 5-pole skew wound armature

  • Dual flywheels

  • All-wheel drive

  • All-wheel electrical pick-up

  • Directional LED headlights

  • Printing and lettering legible under magnification

  • Operates on Code 70, 83, and 100 rail

  • Packaging safely stores model

  • Recommended Radius: 22”

 

      C$282.99 C$267.99

      Reviews