Scaletrains Rivet Counter Ho Scale AC4400CW Ferromex/Diabla DCC & Sound *Reservation*

Scaletrains Rivet Counter Ho Scale AC4400CW Ferromex/Diabla DCC & Sound *Reservation*

SKU #'s

SXT39657 Cab# 4553

SXT39659 Cab# 4558

SXT39661 Cab# 4568

SXT39665 Cab# 4562

*Pre-order discount of $15 per locomotive will be applied on invoice*

Pre-Order Estimated price is $420.99 CDN + Tax + Shipping. Price will be subject to change to fluctuation in exchange rate. Price in USD is $304.99  A deposit of $50 will be required upon pre-order deadline. If no deposit is made the order will be cancelled. If you are a US customer and which to be billed in US funds, please contact me and i can send you invoice in US funds. * 

  • Series 4550 to 4574; ex FSRR 4550 to 4574, built 11-12/2004
  • Era: 2008 to present
  • Road numbers 4553 and 4558 
  •      Ferromex ‘Diabla’ scheme
  • Road number 4568
  •      Ferromex ‘Diabla’ Scheme with Mexican flags on cab sides
  • Fully-assembled
  • Multiple road numbers 
  • Operating LED-illuminated ground lights on both sides of locomotive*
  • Operating LED-illuminated front pilot face mounted ditch lights**
  • Operating LED-illuminated front, rear, and side walkway lights*
  • Printed low-mount cab number boards with separately controlled backlit LED-illumination*
  • Tall snowplow with open doors and two (2) grab irons
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers
  • 5-step stepwells with see-through steps
  • Walkway with front anticlimber
  • GE “nub” pattern walkway tread
  • Narrow profile end handrails
  • Front nose headlight
  • Nose door with window 
  • Two-piece nose top grab irons
  • Battery cabinet access door without latch
  • GE safety cab with three (3) side windows
  • Right side cab under floor access doors: dual large louver panels per door
  • Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit
  • Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls
  • In-cab grade crossing camera
  • Tinted cab side windows
  • Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
  • Octagonal antenna dome
  • Late: two (2) tall, welded X-panels and three (3) large, bolted X-panels underneath
  • Continuous reinforcement rib under dynamic brake intake grilles
  • High-capacity dynamic brake exhaust (3-port)
  • Rearward right-side air intake grille
  • Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door
  • Capacitor box on left side walkway
  • Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors
  • Late angled engine cab profile with tri-fold power assembly access doors
  • Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab
  • Late non-flanged exhaust stack housing
  • “Bathtub” exhaust silencer
  • 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
  • Right side late radiator door grilles in alternating heights
  • Standard brake wheel
  • Left rear hood door grille arrangement: tall, short, tall grilles
  • Low-mounted rear sand fill
  • Late angled lifting “tabs” on ends of radiator wings
  • Accurately profiled frame with separately-applied plumbing and traction motor cabling
  • Early GE Steerable Trucks
  • Rotating axle bearing caps
  • No speed recorder
  • Dual Graham-White (Salem) 824-100 centrifugal air filters
  • No air dryer
  • 5,000-gallon fuel tank with angled weld seam; clean out on left side
  • Single fuel fills per side
  • Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges
  • Fuel tank mounted steel bell
  • Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover
  • Early square handbrake chain bracket
  • Spare coupler knuckle holders on rear pilot face
  • Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more
  • Motor with 5-pole, skew-wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible under magnification
  • Operates on Code 70, 83, and 100 rail
  • Packaging safely stores model
  • Recommended Radius: 22”

      C$420.99 C$405.99